If you have a fire or water emergency, please call us now at (406) 252-0859

To have the optimal experience while using this site, you will need to update your browser. You may want to try one of the following alternatives:

Fire & Water - Cleanup & Restoration

3 Ways to Keep Your Fire Sprinkler System in Check

2/12/2018 (Permalink)

Commercial fires can happen anywhere, even in Billings, MT. While it’s impossible to know when they may occur, keeping your building prepared for any disasters is key to preventing a possible tragedy in the future. Most commercial properties operate with a fire suppression system in place, like a working fire sprinkler system. However, since many go unused for long lengths of time, they sometimes fall by the wayside in terms of maintenance. Here are three ways to keep your sprinklers in check so you’ll only have to deal with fire sprinkler cleanup after a situation arises, as opposed to any more horrifying consequences.

1. Check your building’s water pressure. If the building’s other water fixtures generally work fine, then you probably won’t have any issues securing ample water pressure through your sprinkler system. However, due to possible valve closures through the interior of the walls, especially for plumbing through systems that rarely get used, it’s best to do a check to indicate the pressure levels. Calling on fire service professionals can be helpful in completing this process correctly.

2. Clean the coatings on your sprinkler heads. Sprinkler heads can collect dirt and debris easily, especially in high traffic areas like kitchens that build up grease deposits. Any coating on the fire sprinkler heads can block full access to water if a fire is in progress, so cleaning the heads is crucial for efficient usage. Clean them with basic degreasing solutions or soap that doesn’t leave residue behind.

3. Inspect your non-electric control valves. Building owners should make a habit of checking the control valves if they’re non-electric, as no water can be released without them being open. Electronic valves can be monitored through annual inspections.

Disaster can strike at any moment, so knowing that your fire suppression system is up to code can be reassuring for you and everyone in the building. If your fire sprinkler system in Billings, MT, is maintained properly, handling a little fire sprinkler cleanup after an event occurs might be the only thing you need to worry about.

For more information, visit http://www.SERVPRObillings.com.

Other News

View Recent Posts